Author Archives: p6v8

Sunny day today…..

I had a peek under the cover today and the car is still there…… So went into the garage and continued the work overhauling the engine. The old cam was well worn so will be replaced with a better example … Continue reading

Posted in The engine | Tagged | Leave a comment

36 hours to Irish Classic Retro

Look what’s just arrived….

Posted in The Build | Leave a comment

48 hours to the Irish Classic Retro

Yesterday I spent the whole day working at the car. A few minor mechanical tweaks, a lot of Dinitrol anti-rust spraying and fitting body work including a the little trim bits. After putting all the badges on the car I … Continue reading

Posted in The Build | Leave a comment

Back to the body

A quick post with a few picture showing where we are now. After collecting the doors and wings from the painter I built the doors. And at Tims the bare car was still being welded. We had intended to spend … Continue reading

Posted in The Build | Leave a comment

Tightening the LSD

With the Jag IRS out of the car, I could strip the 4HU LSD and shim the springs to tighten the diff. The diff has never been measured for the breakout torque, but now it was 25ft.lb, I want to … Continue reading

Posted in The Build | Leave a comment

While the panels are away, we play…..

We reached our deadline for sending the panels to the painter. We didn’t get them completely finished, the door skins were only just held on and the lower skin repairs were given to the painter in a state that he … Continue reading

Posted in The Build | Leave a comment

Getting ready for paint.

This weekend was the last for repair and modifications to the Rover P6 panels, before they are removed and left with a painter. We have done a fair amount of work to the chassis itself, removing the lower D pillars … Continue reading

Posted in The Build | Leave a comment